Archive

Archive for the ‘Lux-Man’ Category

Rolex Cosmograph Daytona, orologio di lusso con diamanti e zaffiri

March 19, 2012 Leave a comment

Sin dal suo lancio nel lontano 1963, il Cosmograph Daytona si è sempre presentato come una figura iconica di casa Rolex e, in questa nuova variante, presentata durante l’evento Baselworld 2012, si propone con un’affascinante mix di pietre e colori.
Il nuovo Oyster Perpetual Cosmograph Daytona, presenta sulla lunetta i colori dell’arcobaleno, riprodotti grazie alla presenza di zaffiri di diverse gradazioni; i colori vanno dal rosso, all’arancio, al giallo, al verde, al blu, al lilla e al rosa. Per conferire maggior lucentezza all’opera, oltre alla raffinatezza delle pietre ed all’attenta incastonatura da parte degli artigiani di casa Rolex, si è scelta una cassa da 40 mm in oro giallo 18 carati. Le anse della cassa, gli indici del quadrante e le spallette di protezione, sono anch’esse impreziosite da pietre preziose, rendendo particolarmente ricercata ed esclusiva quest’ultima declinazione del Daytona.
Passando alle caratteristiche di questo prezioso orologio, troviamo un’impermeabilità garantita fino a 100 metri; la corona di carica è dotata infatti del nuovo sistema brevettato di tripla impermeabilizzazione TRIPLOCK.
All’interno del Cosmograph Daytona troviamo il movimento meccanico calibro 4130, sviluppato interamente da casa Rolex; come tutti i movimenti Perpetual, il calibro 4130 è un cronometro svizzero certificato, considerato un titolo riservato agli orologi di precisione superiore che hanno superato con successo i test del Contrôle Officiel Suisse des Chronomètres.
Come si può notare dalle foto, questo Cosmograph Daytona è dotato di bracciale Oyster in oro giallo 18 carati, con fermaglio di sicurezza Oysterlock che è in grado di prevenire qualsiasi apertura accidentale. Il bracciale in questione, sviluppato interamente da casa Rolex, dispone di maglie molto massicce e di una maglia di prolunga rapida Easylink, che permette di allungare il bracciale velocemente di ben 5 mm per un maggiore comfort.
Infine, ecco a voi alcune foto di questa nuova opera di alta orologeria presentata a Baselworld 2012 da casa Rolex; per altre informazioni, basta visitare il sito ufficiale Rolex.

Fonte: GoLook.it

Categories: Lux-Man, Lux-Woman Tags:

Ulysse Nardin Marine Chronometer Manufacture, orologio imponente

March 15, 2012 Leave a comment

La prestigiosa maison Ulysse Nardin, ha presentato, nel corso dell’evento Baselworld 2012, il nuovo cronometro da marina che porta il nome di Marine Chronometer Manufacture.
Si tratta di un orologio che si presenta con un’imponente cassa da 45 mmcaratterizzata dalla presenza di una piccola tacca in caucciù sulla corona. Il quadrante di questa nuova opera di alta orologeria è realizzato a mano daDonzé Cadrans, interamente smaltato e caratterizzato dalla presenza dei numeri romani in colore nero con tocchi rosso ciliegia. Il tutto si esprime a meraviglia con un effetto a contrasto sulla base bianco neve, chiuso da una cassa interamente inoro rosa 18 carati.
All’interno dell’Ulysse Nardin Marine Chronometer Manufacture, troviamo l’insolito Calibro a carica automatica UN-118.
Di seguito, eccovi elencate le referenze e le caratteristiche di questo nuovo cronometro, disponibile anche con cassa in titanio e lunetta in oro e acciaio inossidabile con lunetta in titanio:
Ref. 1186-122 oro rosa 18 carati con quadrante smaltato Grand Feu. Edizione Limitata a 350 pezzi;
Ref. 1185-122 titanio con lunetta in oro;
Ref. 1183-122 acciaio inossidabile/titanio.
Caratteristiche:
Movimento: Calibro UN-118, 11 1⁄2’’;
Movimento Manifattura: Scappamento brevettato DIAMonSIL;
Oscillatore: ruota del bilanciere inerziale brevettato I 10 con spirale in silicio;
Rubini: 50 rubini;
Riserva di carica: circa 60 ore;
Tipo: automatico;
Funzioni: ore, minuti, piccoli secondi, riserva di carica, e gran data;
Correttore della data: avanti e indietro;
Cassa: oro 18 ct o titanio con lunetta in oro oppure titanio – con acciaio inossidabile;
Corona: a vite;
Diametro: 45 mm;
Impermeabilità: 200 m;
Vetro: zaffiro antiriflesso;
Fondello: zaffiro;
Bracciale: cuoio o caucciù con elementi in oro oppure in titanio e chiusura deployante , bracciale oro 18ct oppure titanio-oro, o titanio-acciaio inossidabile;
Presenza del contaminuti.

Fonte: GoLook.it

Categories: Lux-Man Tags:

Tonino Lamborghini, nuova collezione di borse in carbonio

March 12, 2012 Leave a comment

This slideshow requires JavaScript.

Questa nuova collezione di borse firmata da Tonino Lamborghini, nasce da una sfida contro quello che è la moda attuale, plasmando ogni elemento con materiali all’avanguardia, ispirati da quelli usati nelle automobili da corsa del prestigioso marchio automobilistico.
La borse in questione sono state ideate pensando a due concetti, la robustezza e la leggerezza, da cui ne traggono la massima ispirazione considerando il risultato finale.
Secondo quanto rivelato, nessuno mai fino ad ora aveva utilizzato la fibra di carbonio sotto forma di tessuto morbido per realizzare accessori di moda, ed è data proprio da questo principalmente l’esclusività di questa nuova collezione, in cui dominano linee semplici e minimali, in grado però di offrire tutto il comfort possibile ed immaginabile.
Questa nuova collezione è unisex e si compone di diversi modelli, tra cui una borsa da viaggio ed una messenger; per altre informazioni e per il prezzo, basta visitare il sito lamborghini.com

Fonte: GoLook.it

Categories: Lux-Man, Lux-Woman Tags:

Rolex Oyster Perpetual Sky-Dweller, nuovo capolavoro in oro al Baselworld 2012

March 12, 2012 2 comments

La prestigiosa casa d’alta orologeria Rolex, presenta in occasione del Salone Mondiale Baselworld 2012 il nuovo Oyster Perpetual Sky-Dweller.
Si tratta dell’ultimo arrivato della famiglia Oyster, che si presenta con all’interno ben 14 brevetti, tra cui 5 del tutto nuovi.
Del nuovo Rolex Oyster Perpetual Sky-Dweller sono disponibili diverse varianti: in oro bianco 18 carati, in oro giallo 18 carati (immagine in alto) e in oro rosa 18 carati.
Questo nuovo capolavoro d’alta orologeria stupisce soprattutto per la sua evoluzione tecnologica; monta infatti il doppio fuso orario con ora locale indicata dalle lancette centrali e ora di riferimento in 24 ore su disco girevole. Il calendario annuale SAROS, richiede una sola correzione all’anno e l’indicazione dei mesi in 12 finestrelle separate presenti sul bordo del quadrante.
Il Rolex Oyster Perpetual Sky-Dweller è dotato del nuovo calibro 9001, che esprime in tutto e per tutto l’affidabilità della maison, grazie alla sua robustezza e precisione; la cassa è da 42 mm.
Per informazioni sul prezzo e per la referenza delle diverse varianti, basta visitare il sito ufficiale rolex.com

Fonte: GoLook.it

Categories: Lux-Man Tags: ,

Hublot, orologio in diamanti più costoso al mondo al Baselworld 2012

March 9, 2012 Leave a comment

Sarà presto presentato al Baselworld 2012, ma la prestigiosa casa di orologi svizzera Hublot l’ha già definito come l’orologio più costoso al mondo, data la presenza di oltre 1.200 diamanti sul suo corpo.
Jean-Claude Biver, presidente della casa, spiega che ha fornito questa considerazione perchè, data la superficie limitata di un orologio, è impossibile idearne uno più prezioso.
Come già accennato, dunque, quest’orologio Hublot si presenta con oltre 1.200 diamanti sul suo corpo per un totale di 140 carati; la base è interamente in oro bianco, così come ogni suo componente e particolare. Per crearlo ci sono voluti 14 mesi di ininterrotto lavoro e l’impiego di 12 professionisti, fra incisori e incastonatori.
Il prezzo di quest’orologio sarà di 5 milioni di dollari e, secondo alcune rivelazioni, già ne è stato ordinato qualche esemplare da parte di alcuni personaggi milionari.

Fonte: GoLook.it

Categories: Lux-Man, Lux-Woman Tags: ,

Rolex Submariner 2012, simbolo dell’alta orologeria subacquea

March 8, 2012 2 comments

Presentato a Baselworld 2012 il nuovo Rolex Submariner, da sempre simbolo indiscusso dell’alta orologeria subacquea.
L’orologio non presenta grandi cambiamenti estetici, anche in onore del suo modello storico lanciato nel 1953, infatti la cassa viene lievemente ridisegnata insieme al bracciale, ma le innovazioni di ultima generazione Rolex lo rendono un orologio ancor più affidabile e robusto.
Le caratteristiche principali di questo splendido gioiello da polso sono concentrate su alcuni punti specifici, ovvero:
– Lunetta in ceramica unidirezionale Cerachrom, che la rende inalterabile e a prova di graffi.
– Una luminescenza prolungata e di colore blu, che consente una leggibilità straordinaria anche al buio.
– Bracciale Oyster con funzionalità Glidelock, ovvero un ingegnoso dispositivo alloggiato sotto il coperchio del fermaglio, che consente di regolare con precisione la lunghezza del bracciale, senza l’usilio di nessun attrezzo speciale(tale funzionalità è comoda anche per escursioni subacquee con muta da sub).
E per finire un meccanismo estremamente preciso, ovvero un calibro 3130 di casa Rolex, a carica automatica bidirezionale con rotore Perpetual e certificato ufficiale del COSC.
Regolazione di alta precisione, grazie ai quattro dadi microstella in oro e un’autonomia di carica di ben 48 ore.
Inoltre c’è da dire che l’intero meccanismo è stato costruito dalla Rolex con leghe esclusive che lo rendono del tutto insensibile ai campi magnetici e imprecisioni di qualsiasi genere.

Fonte: GoLook.it

Categories: Lux-Man Tags:

Badollet Tourbillon Stellaire, remembrance of galactic timepiece

This slideshow requires JavaScript.

Conveying the remembrance of time and imbued with dreams and an aura of mystery, meteorite fragments symbolise the ephemeral nature of time and humankind’s vision of eternity. Badollet has chosen to integrate this highly symbolic material within the Tourbillon Stellaire. The BAD1630 movement that drives this Instrument of Time is distinguished by its baseplate entirely made from meteorite and by the upper bridge of the tourbillon carriage set with extra-terrestrial olivines. This use of extra-terrestrial materials is unprecedented in the design of watch movements.
Description
This mechanical hand-wound movement, endowed with a 120-hour power reserve displayed on the caseback, indicates the hours and minutes by means of central hands, as well as a tourbillon that is visible through the openworked dial at 6 o’clock. Revealing the symbolic power of the infinitely small, the carriage of the flying tourbillon carrying the Badollet logo and weighing less than one gram is set in a free-spirited and random manner with various shapes of extra-terrestrial olivines, also extracted from meteorite fragments. The 44 mm-diameter case in 150 palladium-coated white gold of the Tourbillon Stellaire is fitted with a sapphire crystal caseback enabling one to admire the back of the exceptional movement as well as its power reserve. Water-resistant to 30 metres, this stunning model features a glareproofed sapphire crystal protecting an openworked dial with Roman numeral hour circle, revealing the various parts of the movement and its meteorite baseplate.
The caseback also provides a glimpse of the finely openworked and hand-drawn bridges, depicting galactic circles.
Produced in an edition that is limited by its very nature, the Tourbillon Stellaire comes fitted with a genuine crocodile leather strap, complete with a folding clasp in 150 palladium-coated white gold.
Meteorites
These extracts from extra-terrestrial matter, originating from the depths of the universe, have always exercised a powerful fascination over human beings, evoking the mysteries of the creation of the world. Believed to have formed four billion years ago, at the same time as the solar system, meteorites constitute an incredible source of potential knowledge, carrying within them memories of what the solar system was like before the planets were formed.
The Cape York meteorite
The baseplate of the BAD1630 movement was created from the Cape York meteorite, named after the place where it landed, in Melville bay to the west of Greenland. It is thought to have dropped form the sky 10,000 years ago, even before Greenland was inhabited. This meteorite, discovered during a perilous expedition headed by English explorer Sir John Ross in 1818, was particularly important in the daily life of the Inuits, who used it to make arrow heads, harpoons and knives.
Extra-terrestrial Olivines
Badollet has chosen to set the tourbillon carriage, not with the usual precious stones, but with sidereal gems: olivines, detected in the dust halos surrounding young stars, as well as in the dust coma of the Hale-Bopp comet. Earth-bound olivines, found in great abundance in volcanic rocks, are used in making jewellery.
While extra-terrestrial or “heavenly” olivines feature much the same composition as their much younger earthly sisters, they can nonetheless be identified by scientific analyses.
Badollet holds an official certificate certifying the “nonearthly” origin of the olivines used to adorn its Tourbillon Stellaire.
Galactic circles
Hundreds of millions of stars rotate around a common centre of gravity, thereby forming a galaxy. “Galactic circles”, represented by the bridges of the BAD1630 movement powering the Tourbillon Stellaire, is the name given to describe the path described by these stars as they pursue their rotation.
The Tourbillon Stellaire, a genuine watchmaking challenge Badollet’s choice of meteorite for the baseplate of its BAD1630 movement was not determined merely by its symbolic value, but also viewed as a chance to rise to a technical challenge. Meteorite is a material that is particularly hard to fashion, not only because its structure is extremely uneven, but also because it tends to become magnetically charged during machining. Badollet therefore had to develop some exceptional processes in order to accomplish the apparently impossible.
A unique timepiece
The Cape York meteorite is an octahedric type meteorite made up of more than 91% iron and having been exposed to cosmic rays for an estimated 93 million years. This high iron content is liable to modify the colour of the Tourbillon Stellaire movement, yet without affecting its smooth operation. This distinctive feature reinforces the unique nature of each timepiece, since none of them will look identical as time goes by.
Movement – BAD1630. Tourbillon type mechanical movement with Swiss lever escapement. Manual winding. Standard central analogue display of the hours and minutes. Baseplate made from meteorite material, upper bridges of the tourbilon carriage set with olivines, and bridges representing galactic circles. Tourbillon carriage visible at 6 o’clock on the dial side, with personalised Badollet bridge. Suspended-type tourbillon (without bars) performing one full rotation in one minute. Cage pivoting without ball-bearing mechanism. Power-reserve indication (IRM) on the caseback (bridge side). Number of lignes – 13 ¼. Frequency – 21,600 vph (3Hz). Power reserve – Approx. 120 hours.
Case – Back and bezel in 150 palladium-coated white god. Sapphire case middle. Sapphire crystal, glareproofed on both sides, ultra-hard treatment. Crown in 150 palladium-coated white gold, water-resistant when the crown is pulled out. External diameter – 44 m. Inter-horn width – 24 mm. Water-resistant to 30 metres.
Hands – Hours: Leap-type, rhodium-plated. Minutes : Leaf-type, rhodium-plated.
Strap – Saddle-stitched, entirely hand-sewn Black Safari alligator mississipiensis leather.
Clasp/Buckle – Folding clasp, 150 palladium-coated white gold.
Source: Badollet

Fonte: Luxury & Fine TimepiecesFacebook

Categories: Lux-Man Tags:

Perrelet Tourbillon, masterpiece in limited edition

This slideshow requires JavaScript.

A mechanical marvel, the Tourbillon remains a benchmark in the universe of luxury watchmaking and signals the return of a masterpiece to the Perrelet collection.
In its generous 50 mm, rose gold and DLC steel case, already appreciated in the Perrelet collection, the new interpretation of this rare automatic Tourbillon with off-centre hour and minute display, is a magnificent demonstration of style.
Perrelet has chosen to work the structure and composition of its latest creation in depth, in order to evoke the multidimensional aspect of time. Thus the cage of the flying tourbillon is presented inside a cylindrical ring positioned at 6 o’clock. The small second’s indication is provided by the revolving of the cage, which completes one full rotation every 60 seconds.
Two wing-shaped, carbon fibre zones lead the eye towards 12 o’clock, where the tips of the hour and minute hands are finished in a luminescent material.
The minute hand, precisely profiled to rise out of its recessed base area, matches the contours of its surrounding limits perfectly. The extensions of the claws gripping the case embellish the dial in the form of six double tubes, adding force and character to the whole.
On the reverse side, the crystal case back reveals the “Côte de Genève” decoration of the movement and the Perrelet oscillating weight, brushed and set with a crystal engraved with the Brand’s name.
This complication is completed with a black rubber strap and DLC steel tongue buckle in a limited series of 20 pieces only.
Skilfully combining avant-garde with tradition, this out of the ordinary timepiece would certainly have appealed to the inventor, Abraham-Louis Perrelet; because over and above the product, there is man, the love of the know-how and the pleasure of sharing a passion.
Movement – Automatic P-161. Open-worked, exclusive decorated Perrelet rotor. Power Reserve 110 hours. Frequency 28’800 (4Hz). Rubies 33.
Case – Ø 50 mm / Thickness 14.30 mm. Case material – Middle part 18 carats rose gold (4N). Bezel and back DLC-treated stainless steel. Anti-glare sapphire crystal (front & back).
Dial – Black, carbon fibber.
Water resistance – 5 ATM.
Strap – Natural black rubber DLC-treated stainless steel buckle.
Source: Perrelet

Fonte: Luxury & Fine TimepiecesFacebook

Categories: Lux-Man Tags:

Maurice Lacroix Pontos Chronographe Valjoux, sporty and sculptured timepieces

This slideshow requires JavaScript.

True to the principles of the Pontos collection, the new Pontos Chronographe plays the game with no need for time out. Its pure-bred style suffers no compromise. With its sporty, sculptured lines, this watch is designed to show off its distinctive features. Contemporary in style, the blue dial highlights the chronograph functions and gives substance to its overall proportions. Powered by precision mechanics, this watch is aimed at those who appreciate sportsmanship and design.
A variation on the Pontos Chronographe series launched in 2004, the Pontos Chronographe timepieces are operated by an automatic movement based on the Valjoux 7750 caliber, renowned for its performance and reliability. It is fitted with a chronograph featuring 30-minute and 12-hour counters, and the small seconds and date apertures are at 9 and 6 o’clock respectively, creating a beautifully balanced display of the time data.
The steely blue color of the sun-brushed finished dial confirms its high quality and pedigree. To achieve optimum legibility, the applied index markers and hands have a luminescent coating. The steel case features skilfully designed push-pieces that retract into the case middle, while the case back opens fully to reveal the beauty of the mechanism inside. Available with a bracelet or leather strap, the new Maurice Lacroix chronograph is an utterly reliable master of short time measurement.
Movement – Personalized Valjoux 7750 caliber, with guaranteed quality and precision. Self-winding caliber ML112 based on the Valjoux 7750 movement. Frequency – 28,800 vibrations/h, 4 Hz. Power reserve – 46 hours. Jewels – 25. Adjustments – 3 positions when fully wound and after 24 hours. Decoration – Rhodium-plated movement, decorated by hand: circular-grained with Côtes de Genève.
Functions – Hours and minutes indicated by central hands. Small seconds at 9 o’clock. Chronograph seconds indicated by a central hand. 30-minute chronograph counter at 12 o’clock. 12-hour chronograph counter at 6 o’clock. Date indicated in an aperture at 6 o’clock.
Case – Ø 43 mm, steel case. Refined finishing, combining polished and brushed surfaces. Domed sapphire crystal with anti-reflective coating on both sides. Screwed case-back with large sapphire crystal. Large Ø 7 mm crown with radial pattern for optimum handling. Unique pushers featuring a tip-over device with horizontally brushed finishes and polished facets. Water-resistant to 50 m / 5 atm.
Dial – Available in Blue color with silver counters. Pure, simple design highlighted by the sun-brushed finishing on the base. Snailed counters. Applied counter rings featuring a play on brushed and snailed finishing. Diamond-cut, faceted applied hour-markers.
Hands and Discs – Diamond-cut, faceted, rhodium-plated hands, with “BGW9” Superluminova (blue lume).
Strap/Bracelet – Crocodile-skin (Crocodylus niloticus) strap with large scales, calfskin lining and matching stitching.
Metal Bracelet – 5-row bracelet for superior comfort. Alternation of vertical-brushed and polished finishing. Folding clasp with push-pieces.
Folding Clasp – Steel folding clasp with pushers and pinch system. Brushed finishing.
Source: Maurice Lacroix

Fonte: Luxury & Fine TimepiecesFacebook

Categories: Lux-Man Tags:

Richard Mille RM 026 Tourbillon, timepiece in limited edition

This slideshow requires JavaScript.

Tonneau case – Limited edition: 15 unique pieces, 18k white gold gem-set case.
Caliber RM026 – Manual winding tourbillon movement with hours, minutes and power reserve, inspired by the RM 019.
Dimensions – 45 mm x 39.70 mm x 12,60 mm.
Main features
(Many of which are major technical innovations)
Power reserve
Circa 48 hours. This function is displayed using a newly designed differential power reserve system, with a printed red line on a moving disc located between 10 and 11 o’clock.
Movement
Two creatures adorn its precious movement, writhing and searching within the tourbillon movement, whilst simultaneously holding the precious tourbillon movement in place.
We can admire a ruby & diamond encrusted 18k white gold snake and an emerald & diamond encrusted 18k white gold snake with red coral tongue. But there are several other versions available of these coupled snakes, such as precious stones encrusted or semi-precious stones encrusted, or engraved stones, and even enameled bodies.
Each model is an unique piece.
It took many hours and extremely precise work to engrave by hand the scales of these two exceptional jewellery pieces.
Serpents in mythology have complex roles that can be either good or evil. In connection with the positive properties of Black Onyx they however take on a protective role, representing the potent guardians of temples and other sacred places. Thus, they are natural guardians of treasures or sacred sites that are intimate and require protection.
Black onyx baseplate
Onyx is a variety of cryptocrystalline quartz chalcedony composed of silicium dioxide, (SiO2). The rectilinear black and white parallel stripes version is part of the agate types. The fully black type is called Black Onyx, and is said to be able to deflect harmful energy down to the earth, while providing stability. For this reason, Black Onyx is considered as a charm-stone against spells. Black Onyx also symbolizes equilibrium and inspiration.
Bridges made of titanium
These components in grade 5 titanium with black PVD treatment. This provides the whole assembly great rigidity, as well as precise surface flatness which is essential for the perfect functioning of the gear train.
Variable inertia, free sprung balance
The free-sprung balance provides better reliability in the event of shocks, movement assembly and disassembly. It also guarantees better chronometric results over an extended period of time.
Ceramic endstone for the tourbillon cage
This reflects a technical and long-term view towards the elimination of wear phenomena, resulting in improved technical tribology.
Torque limiting crown
This additional security system prevents from accidental overwinding, which could cause damage to the winding stem or putting extreme pressure on the mainspring barrel. The crown is set with precious stones or semi-precious stones depending on the version.
Barrel pawl with progressive recoil
This device permits a profitable winding gain (circa 20 %), especially during the winding start. It is also helpful in the distribution of the mainspring’s internal tension.
Other features
Movement dimensions – 30.20 mm x 28.60 mm.
Thickness – 4.97 mm.
Tourbillon diameter – 12.30 mm.
Balance wheel diameter – 9.12 mm.
Number of jewels – 21.
Balance – Glucydur, 2 arms, 4 setting screws, inertia moment 10 mg.cm2, angle of lift 53º.
Frequency – 21,600 vph (3 Hz).
Balance spring – Elinvar by NIVAROX.
Shock protection – KIF Elastor KE 160 B28.
Stone setting in white gold.
Barrel shaft in nickel-free chronifer (DIN x 46 Cr 13 + S) with the following characteristics: stainless- antimagnetic- suitable for tempering.
Case
In the world of horology, the case of Richard Mille watches is currently considered as the most difficult to manufacture. This tripartite tonneau-shaped case is fully curved, which enables the watch to be ergonomic and comfortable but is time consuming during its production and requires a high level of quality control. These front and back curves are part of the Richard Mille watch case regardless of their shapes (tonneau, round, rectangular). They demand ultimate precision and no stress in the metal. The bezel side and the case back have to be perfectly assembled in the case middle with no constraints, to prevent the sapphires from any damage. These manufacturing specifications required one year of research and development.
The specific tonneau shape of the RM 026 requires 47 stamping operations including 21 for the forming. Tooling takes 4 hours and the RM 026 is obtained after 255 milling operations. The finishing process requires a full day for grinding, glazing and polishing.
The tripartite case is water resistant to 50 meters, ensured by two Nitril O-ring seals. The case is assembled with 12 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel.
On certain models of the RM 026, the bezel, middle case and back are set with precious stones following the harmony of the two coupled snakes embracing the movement.
Interior flanges
Upper flange in black carbon fiber, with the hours index set with diamonds. Lower flange in black carbon fiber. with the minutes index in white color.
Crystal
Bezel side – In sapphire (1800 Vickers) with anti-glare treatment (both sides). Thickness – 1.20 mm.
Case back – In sapphire with anti-glare treatment (both sides). Thickness – At the center 1 mm and outer edges 1.73 mm.
Finishing
Movement
Anglage and polishing by hand (excluding Onyx and black treated parts).
Locking sections hand polished.
Sapphire blasted milled sections.
Lapped and polished contact points.
Burnished pivots.
PVD treatment (excluding Onyx).
Steel parts
Sapphire blasted surfaces.
Satin finished surfaces.
Anglage and polishing by hand.
Burnished sections.
Gear wheels
Concave chamfering with a diamond tool.
Circular finished faces.
Surface treatment or rhodium-plating (before cutting the teeth).
Minimum correction applied to the wheels in order to preserve geometry and performance.
Source: Richard Mille

Fonte: Luxury & Fine Timepieces – Facebook

Categories: Lux-Man Tags: